Rotronic HC2 Manuale Utente Scaricare il pdf (Pagina 9)

E-M-HC2-accessories_24

Rotronic AG

Bassersdorf, Switzerland

Document code Unit

Accessories and Parts

for probes, indicators and transmitters

Instruction Manual

Document Type

Page

9 of 23

Document title

5.4 RS-485 and Modbus adapters

Order Code Description

E2-01XX-MOD

Female connector (black) for HC2 probes with

1 m (3.2 ft) cable (4 wires with tinned ends):

Powers the HC2 probe and allows connecting

the probe to either a RS-485 network or a

Modbus network, depending on the

communication protocol used by the probe

See note below

E2-02XX-MOD Same as E2-01XX-MOD with 2m (6.5 ft) cable

E2-05XX-MOD Same as E2-01XX-MOD with 5m (16.4 ft) cable

Specifications

Supply voltage to adapter

5.0…28 VDC

Supply voltage to probe

3.3 VDC

Current consumption (includes HC2 probe)

10 mA typical

RS-485 specifications Baud rate : 19200

Parity : none

Data bits : 8

Stop bits : 1

Wire color

Name

Function

Green VDD (+) Power supply +

Grey GND Power and digital signal

Red RXD RS-485 bi-directional TX+ / RX +

Blue TXD RS-485 bi-directional TX- / RX -

NOTE: The electronic circuit of the adapter generates a small amount of heat. For this reason, do not place

the adapter directly under the probe. Depending on the application, using a passive cable to separate the

adapter and the HC2-S or HC2-S3 probe is recommended to prevent heat transfer from the adapter to the

probe and obtain the best measurement accuracy.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Commenti su questo manuale

Nessun commento

Rotronic HC2 Manuale Utente Pagina 9

Commenti su questo manuale